| |

Jewellery Box

For Whom Do We Make?

The stuff we make involves many interested parties. There are: the makers, staff who help, managers of the centre, recipients of the objects, et al. Given the positive power of enthusiasm, it is good to spread that good feeling as widely as possible. When the makers make more than they need, extra stuff can be given away. This week we make a jewellery box; it can be a gifted to any of the interested parties. And who can refuse a gift from sweeties such as ourselves!

Enthusiasm has momentum, the more there is the more powerful it becomes!


Construction

Boxes are simple to make. This challenge of this project is to create a simple to construct design that, when finished, has sufficient grandeur to look as though it deserves to be trusted with precious belongings.

When four hands are working at one corner it is difficult to keep boards aligned. Housing joints and rebates will help parts seat themselves into accurate place. For material there is some low grade 9mm plywood that won’t be able to cope with our doweling habits; we can use an electric stapler instead. That takes care of neatness in construction.

Batch Production
In this case I made components for twenty boxes, i.e. twenty lids, twenty bottoms, forty front/backs, et cetera. It was an efficient production run achieved by stacking boards five high and cutting simultaneously. For instance, a large forstner style bit cut holes in  five stacked boards that were subsequently cut in half to make feet for the box to stand on. It is interesting working out an order of processes to most efficiently set up a kit of pieces. Each project is a small puzzle to be solved… fun in the workshop!!

Finishing
There are wonderful water based dyes that wood sucks in. Bold colours in combination with natural wood figure should make our gift stand out. The colour will rub off if left untreated so we can seal it with shellac. All this painting exploits my friends’ abilities to wield a brush.

Here I had fun rubbing back the dye with 400 grit paper. It was then sealed with shellac.

For decoration on the inside there is a picture cut from a cheaply printed calendar. Water based PVA softened the paper and dissolved the dye. Colour leached into the wrinkles. That was a pretty accident…

Gut Gosh, There’s More!!!!!!!
Work can be planned to generate a certain conclusion. BUT, no amount of planning can make conclusions certain. This box needed lots of painting. I put out the dyes. I planned beautiful blue, red or green boxes. My friends always take my advice. They wait until it is their turn to get my attention. Sometimes the work is like having one stick and two snakes. Here are some of the conclusions; they are beautiful.

Similar Posts

  • | |

    Pallet Wood

    Pallet wood has challenges.If patina tells a story, this is a saga of neglect.The milling process was rushed, the drying stage left twists and warps, and nails fixed the stigma of an abusive past with rusty stains.With such baggage, construction needed to compensate by accepting skewed realities. All timber in this table was rescued from dumping…

  • | |

    Book Ends

    Indulging Self and Grand Daughter Every act of making has some self indulgence in it. Here is a response to the gift of scraps of 30mm plywood. The sheet edge is a bold linear graphic. Making my grand daughter’s initials to decorate her book ends indulged my desire to play with mitres in the lines…

  • |

    Wooden Cake

    How can a woodworker be involved in cake decorating? My wife is a traditional cake decorator. She does the fancy thing with icing and makes sugary lace and that kind of stuff. An event called for an art deco cake. It could have been made from icing, but in that era much of the furniture…

  • |

    Simple machines

    Simple Machines Blogging takes time and my recent past has involved a sick wife and a new grandchild. Suburban life is rich with texture. It can make blogging take a back seat. Following is a report of a nice afternoon in my shed with my son! My disabled friends haven’t been ignored, the next blog…

  • | |

    Wooden Train

     This project was perfect for batch production; the pieces are simple and can be cut in multiples. BUT, the coolest part of all is that when it was done we put our carriages together and created a train of inspiring proportions. We used our usual techniques of dowel hammered into holes that are 0.5mm too small….

One Comment

  1. Bruce,

    Thanks so much for your wonderful blog. It's inspiring to see what you manage to achieve with your friends. You should be very proud. Looking forward to seeing what comes next!

    Brian H

Comments are closed.